Entering and saving this information allows you to run cycles and test with minimal effort.
#Ethernet testing app password
The controller password and zone names can be entered and saved in the Device Setup page. The valve test can be stopped at any time by tapping the red "Stop" button at the bottom of the page.
If the controller is ready, and your device is within range of your Wifi signal, the zone will open for the prescribed number of seconds. Tap the button the represents the zone to be tested.
The maximum valve test time is 120 seconds. The run time is in seconds and will be displayed on the screen. On the Valve Test page, set the valve test run time by tapping the + or - buttons. If you need to stop the cycle tap the "Stop Cycle" button. Once the cycle is running you can exit the app - EtherRain will manage the cycle with no further input from the app. The cycle will execute sequentially as is typical for all EtherRain cycles. The maximum run time permitted per zone in ZonePopper is 60 minutes.Īfter entering all of the zone times, tap "Run Cycle" and if the controller is ready to accept a command, the cycle will run. On the Run Cycle page, enter the run times for each zone in minutes. Up to four cycles can be saved per controller. The "Cycle Setup" function lets you define and save a cycle for use when running a cycle. The "Device Setup" function lets you enter names for the controller's zones, in addition to saving the controller password. Once the controller password has been saved it will be automatically entered when the Function page is displayed. The password for the controller can be saved by tapping the "Device Setup" button. A valid password must be entered in the password field in order to proceed to the "Run Cycle" or "Valve Test" pages. Both "Run Cycle" and "Valve Test" are accessible from this page. The functions page is displayed after the controller has been selected. If your EtherRain controllers are not displayed on the main screen, make sure you are in range of your WiFi network. Use EtherRain Admin for naming and network configuration. Once you have decided the names of your controllers you can set up the controller within ZonePopper by naming the zones and setting the password. If you have multiple EtherRain controllers on the same network each EtherRain should be given a unique name. Tap the name of the controller that you want to use. ZonePopper will find all of the EtherRain controllers on your network (your device must be connected to the WiFi network associated with the LAN that hosts your controllers). To use ZonePopper, your iPhone or iPad device must be within Wifi range of the Wifi network that is connected to the LAN that hosts your EtherRain controllers.īefore installing ZonePopper please read our privacy policy.įunctions available in ZonePopper include:
#Ethernet testing app manual
ZonePopper provides valve testing cycles or complete manual cycles with only a few taps on your iPhone or iPad screen. ZonePopper implements the EtherRain discovery service and will automatically discover all EtherRain controllers on your network. Note: There is also a version of ZonePopper for Android, but this version is for iOS devices including iPhone iPad, and iPod Touch 6th generation or higher In addition, ZonePopper can run complete cycles quickly and immediately with only a few taps - perfect for when visual inspection determines that your landscape needs a little extra irrigation. ZonePopper for iOS gives you immediate on/off control of your EtherRain for zone and valve testing. ZonePopper™ is an app for Apple iPhone and iPad devices. IPhone/iPad App for EtherRain - ZonePopper for iOS
0 kommentar(er)
